Complete decoration construction process

2022-07-22
  • Detail

A complete set of decoration construction process a top engineering construction process:

1, wood keel gypsum board ceiling Engineering Construction: wood keel selection: no knot bar, no cracking, no bark, no moth, dry and no deformation. The frame spacing of wooden keel (3x4cm) is less than 400cm, and the surface is coated with fireproof paint and fixed with expansion bolts. The surface is 1.2cm thick high-quality double-sided gypsum board, which is fixed with self tapping screws, and the nail cover is coated with antirust paint. The joints of the gypsum board are leveled with special caulking gypsum, and high-quality anti cracking bandages are pasted

2, construction of light steel keel gypsum board ceiling: selection of light steel keel: natural surface gloss, wall thickness of more than 0.6cm, no rust and distortion. The frame spacing of light steel keel (60 Series) is less than 400cm, and it is fixed with expansion bolts. The surface is sealed with 1.2cm thick high-quality double-sided gypsum board, fixed with self tapping screws, and the nail cover is coated with antirust paint. The joints of the gypsum board are leveled with special caulking gypsum, and high-quality anti cracking bandages are pasted

3, wooden ceiling construction: wooden keel selection: no knots, no cracks, no bark, no moths, dry and no deformation. The frame spacing of wooden keel (3x4cm) is less than 400cm, (or select high-quality large core board), and the interior is painted with fire-retardant paint. Seal the high-quality decorative panel, apply transparent putty, polish it smooth, and brush the surface with nitrocellulose varnish for 8-10 times

4, installation and construction of gypsum top corner line: applicable to simple style decoration and European style decoration. Selection of gypsum line: the appearance of gypsum line is smooth, white, dry, without deformation, distortion and damage. It is fixed with special quick adhesive powder for gypsum line, and the base is made of wood and reinforced with gun nails. The joint part shall be repaired with caulking plaster, and the surface shall be painted with top paint for 3 times

5, wooden top corner line installation and construction: suitable for simple style decoration. Pine solid wood line or (0.9--1.2cm) Australian pine board strip, the surface can be grooved with bare metal for decoration. Self tapping screws shall be fixed, and the screw cover shall be coated with antirust paint. The joint part shall be repaired with atomic ash, the surface shall be putty polished smooth, and the surface shall be sprayed with nitro oil mixture for 8-10 times

6, installation and construction of wooden gusset ceiling: applicable to the ceiling of balcony and room top. Wooden gusset plate selection: high quality pine gusset plate, without too many knots, cracking, distortion, mildew, unified color, tight buckle groove, smooth surface treatment. High quality wood keel frame, with an interval of less than 400cm, fixed with expansion bolts. Brush fire retardant paint inside. The surface is sealed with high-quality 9 cm board, sealed with environmental friendly white emulsion, gun nails are used to reinforce pine gusset plates, and pine solid wood lines are used for edge trimming. Apply transparent putty on the surface and brush nitrovarnish for 8-10 times

7, installation and construction of aluminum gusset ceiling: applicable to kitchen, bathroom and balcony ceiling. High quality aluminum gusset plate, light steel keel and special accessories are selected, fixed with expansion bolts, and the special matching aluminum internal corner (external corner) edging strip is used for edging

8, installation and construction of plastic gusset ceiling: applicable to kitchen, bathroom and balcony ceiling. High quality wood keel frame, with an interval of less than 400cm, fixed with expansion bolts. Brush fire retardant paint inside. High quality plastic gusset plate is selected and fixed with gun nails. Special supporting corner line trimming

b construction process of partition and wall works:

1. Gypsum board light wall construction: applicable to indoor partition works. Use high-quality 80 series light steel keel as the frame, with an interval of less than 600cm, filled with benzene board, and sealed with 1.2 double-sided gypsum board on both sides. The joints shall be repaired with caulking gypsum, fixed with self tapping screws, and the nail cover shall be coated with antirust paint. The joints of gypsum boards shall be leveled with special caulking gypsum and pasted with high-quality anti crack bandages. (if one side needs to be pasted with wall tiles, seal the cement pressure plate on one side, hang the iron mesh on the surface, and fix it with self tapping screws.)

2, insulation wall construction: applicable to balcony and external wall without insulation treatment. Use high-quality 80 series light steel keel as the frame, with an interval of less than 600cm, filled with benzene board, and sealed with 1.2cm double-sided gypsum board on one side. The joints shall be repaired with caulking gypsum, fixed with self tapping screws, and the nail cover shall be coated with antirust paint. The joints of gypsum boards shall be leveled with special caulking gypsum and pasted with high-quality anti crack bandages. (if one side needs to be pasted with wall tiles, seal the cement pressure plate on one side, hang the iron mesh on the surface, and fix it with self tapping screws.)

3, sound insulation wall construction: suitable for poor sound insulation of walls and audio-visual rooms. The frame is made of high-quality 80 series light steel keel, with an interval of less than 600cm, filled with sound insulation cotton, and sealed with 1.2cm double-sided gypsum board on one (double) side. The joints shall be repaired with caulking gypsum, fixed with self tapping screws, and the nail cover shall be coated with antirust paint. The joints of gypsum boards shall be leveled with special caulking gypsum and pasted with high-quality anti crack bandages

4, wooden glass partition construction: applicable to indoor partition works. The large core board is cut into pieces to make a frame, and 0.5-1.2cm float flat glass or art glass is selected. The wooden surface is pasted with 0.3cm Australian pine board, the joint is repaired with atomic putty, the surface is polished with putty, and the surface is sprayed with nitro oil for 8-10 times

5, stainless steel glass partition construction: suitable for indoor and toilet, kitchen partition. Choose 0.8---1.2cm stainless steel as the frame. Select 0.8-1.2cm float flat glass or art glass. Special stainless steel metal installation

c construction process of door, door pocket, window pocket and pass:

1. Construction of oil mixed flat shaped door (hollow door): high-quality large core board is cut into pieces to make a frame, with an interval of less than 15cm, sealed with 0.3cm Australian pine board on both sides, and 0.9CM Australian pine board is cut into 45 degree corners and closed at the door edge. The surface is grooved for modeling. Nail holes and joints shall be repaired with atomic putty, the surface shall be polished with putty, and the surface shall be sprayed with nitro mixed oil for 8-10 times

2, construction of oil mixed flat shaped door (solid door): high-quality large core board shall be cut into pieces, shrinkage joints shall be reserved, 0.3cm Australian pine board shall be sealed on both sides, and 0.9CM Australian pine board shall be cut into 45 ° corners and closed at the door edge. The surface is grooved for modeling. Nail holes and joints shall be repaired with atomic putty, the surface shall be polished with putty, and the surface shall be sprayed with nitro mixed oil for 8-10 times

广州癫痫医院

哈尔滨妇产医院

义乌妇科医院

Copyright © 2011 JIN SHI